Designed to offer postural support and a certain degree of restraint
to children and adults to keep them in an upright sitting position.

Fits most types of vehicle seating. Including single & double seats.

To fit the harness access is required between the seat back and the seat cushion
of the vehicle seat. To fasten the fixing straps vertically around the back rest.

For those seats where the back rest 'narrows' towards the top - the Model 27 is more suitable.

It is not a safety harness & should be worn in conjunction with the vehicle safety belt.

The waist belt is fitted with the 'Press Button' buckle as standard.

The 'Steel Safety' buckle can be fitted at extra charge for passengers with challenging behaviour.

Available in three sizes:

NB: When using this harness in conjunction with a booster seat it will probably be necessary
to purchase a larger size of harness as the seating will take up a certain amount of the strapping.

Standard 'Press Button' Buckle

28I (Infant to 5 years) = £58.00

28A (5 to 8 years) = £69.00

28C (9 years to Adult) = £82.50

Steel Safety Buckle (For Challenging Behaviour & Learning Difficulties)

28ISB (Infant to 5 years) = £66.00

28ASB (5 to 8 years) = £77.00

28CSB (9 years to Adult) = £92.00

FITTED TO A BOOSTER SEAT

(All our range of child vehicle harnesses are suitable for use with child booster cushions).

Sometimes it is necessary to make a child with special needs more secure when using a child car seat,
for example for those with inquisitive fingers or potential escapologists.

Model 28 can be used with some booster seats in conjunction with the existing safety belt.

This harness is suitable for the designs of child booster seats which have the adjustable/extending
headrests ("T-Shaped") where the backrest grows or extends with the child.

For other designs of child seat please consider Model 22

The Model 28 harness is firstly fitted to the vehicle seat with the two vertical fixing straps as illustrated.

Now place the child booster seat in position on the seat in front of the model 28 harness and on top of the groin strap.

Then the M.28 harness shoulder straps and waistbelt should be brought forward around the child seat.

The seat is now ready for the child to get into.

Fasten the Crelling harness around the child to be secure and then fasten
the existing lap and diagonal car safety belt over the top.

NB: It will probably be necessary to purchase a larger size of harness
as the seating will take up a certain amount of the strapping.

Optional Extra's

A Cross Strap can be fitted to hold the shoulder straps together
& to help prevent them from slipping off the shoulders.

Available as standard or passed through a padded sleeve.

Standard Cross Strap - £2.80

Cross Strap in Padded Sleeve - £5.55